江苏安科瑞电器制造有限公司

　　ANAPF有源滤波装置选安科瑞harmonic to the power supply system are as follows:

　　1) Harmonics cause additional harmonic loss to the components in the public power grid, which reduces the efficiency of power generation, transmission and electrical equipment. A large number of third-order harmonics over the neutral line will cause overheating and even fire.

　　2) Harmonics affect the normal work of various electrical equipment. The influence of harmonics on the motor not only causes additional loss, but also causes mechanical vibration, noise and overvoltage, which causes serious overheating of the transformer. Harmonic causes capacitors, cables and other equipment overheating, insulation aging and shortened life, so that the damage.

　　3) Harmonics will cause local parallel vibration and series resonance in the public power network, thus amplifying the harmonics, which greatly increases the harm of the above 1) and 2), and even cause serious accidents.

　　4) Harmonics will lead to misoperation of relay protection and automatic devices.

　　5) Harmonics will interfere with adjacent communication systems, and light ones will produce noise and reduce communication quality; Severe cases lead to letter opening, loss, so that the communication system can not work normally.

　　Active filtering and intelligent capacitive technology

　　The concept of active power filter has been put forward in the early 1970s, but due to the influence of the technical conditions at that time, the circuit structure that has been planned has not been implemented. Since the 1980s, there have been numerous articles on the technology and improvement of source filters.

　　With the rapid development of China's economy and science and technology, a large number of applications and popularity of medium and high power and low power electronic equipment, the stability and security of the power grid is increasingly high, but also gave birth to the harmonic control and power compensation and other related technical equipment more and more high requirements. Active power filter (APF) is widely studied and applied because of its strong control effect on current type harmonics and reactive power compensation. Active power filter (APF) has many disadvantages, such as high cost, low capacity and large loss, although it can effectively control the current wave and carry out controllable reactive power compensation. The use of capacitors in parallel compensating the reactive load of the power network has the advantages of less unit investment, large capacity, small power loss and simple maintenance. Therefore, the parallel APF and intelligent capacitor technology have the advantages of good harmonic control ability of APF and large compensation capacity of reactive power compensation capacitor.

　　At present, the company uses frequency conversion devices, electric desalination, electric dust removal, electrolytic cells, electric heaters, switching power supply, UPS and many other power electronic equipment and most of the inductive load such as large motors and transformers, which causes insufficient reactive power output and low power factor, and also causes a large number of harmonic pollution to the power grid. The operation experience shows that the operation of the above equipment connected to the network will lead to serious harmonic pollution of the power supply system and reactive power loss and heating, which will induce electrical equipment accidents, resulting in power failure of equipment and open shutdown of equipment. Therefore, pioneering and intelligent active filtering capacitor technology combined use of active filter good harmonic governance power and reactive power compensation capacity and compensation capacitor, the advantages of eliminating harmonic and fine compensating reactive power not only to ensure the security of power system stability, improve power quality, reduce the loss of electricity and so on has very important significance, Moreover, studying the application of harmonic control and reactive power compensation technology in petrochemical power equipment can develop energy-saving and consumption reduction technology with high cost performance, good effect, good safety, convenience and stability for petrochemical power equipment, so as to achieve multiple purposes such as fault early warning and safety efficiency enhancement.

　　The key technology of active filter harmonic control

　　The basic principle of active power filter is shown in figure 1, the detection of voltage and current compensation object, compensation current by instruction current arithmetic circuit calculation command signal, the signal amplified by the compensation current generating circuit, it is concluded that the compensation current, the compensation current and load current to compensate harmonic and reactive current in offset, achieve the desired power supply current (figure 1, I L is the load current; ILF is the fundamental current; ILH is harmonic current; I C is the compensation current; I S is the power supply current).

　　Key technology of intelligent capacitor reactive power compensation

　　1) The use of imported thyristor control capacitor to achieve no contact, no impact and no filter switching, compared with the ordinary compensation cabinet also has the advantages of low loss, long life of components, maintenance free.

　　2) avoid harmonic resonance and prevent harmonic amplification.

　　3) Fast tracking system load reactive power change, real-time dynamic response.

　　4) Cutting without impact, zero crossing trigger, fast cutting speed, no mechanical contact, no arc reburning.

　　Through the above key technologies, modern power electronics green energy saving products are developed to provide petrochemical enterprises with automatic, intelligent and energy saving green products with reliable performance, so as to achieve the purpose of energy saving, cost reduction and environmental protection.

　　Dynamic reactive power compensation device adopts contactless semiconductor module as switch, adopts full intelligent control, and is composed of controller dynamic switching switch, capacitor, reactor and protective element. The controller tracks and measures the fundamental power factor and reactive current of the load in real time, compares it with the preset given value, and dynamically controls the switching of different groups of capacitors to ensure that the power factor always meets the set requirements. The thyristor zero - crossing trigger ensures that the switching capacitor has no impact, no inrush current and no transition process

　　系统简介

　　功能：

　　电能质量分析与治理系统主要是研究消除供配电系统中的无功补偿和谐波治理问题，主要的产品有有源电力滤波器、低压无功功率补偿装置、静止无功发生器、混合动态滤波补偿装置、混合动态消谐补偿装置、智慧型动态无功补偿装置、谐波保护器等，适用于新建、改建、扩建和技改项目中工业与民用及公共建筑内电气设备的无功补偿、谐波抑制及综合治理等，可根据不同行业类型和负载类型的电能质量问题提供合适的设计解决方案，以达到改善供电质量和确保电力系统安全经济运行的目的。

　　应用场所：

　　（1）商业中心/办公大楼（空调、电梯、可控硅调光等）；

　　（2）港口码头/化工/冶金/造船//造纸//煤矿（变频器等）；

　　（3）通信//医疗/商业中心（UPS、开关电源等）；

　　（4）光伏/充电桩/化工/冶金（整流器等）。

　　系统功能

　　ANAPF有源电力滤波器

　　ANAPF系列有源电力滤波器并联在含谐波负载的低压配电系统中，能够对动态变化的谐波电流进行快速实时的跟踪和补偿。

　　ANAPF系列有源电力滤波器通过CT采集系统谐波电流，经控制器快速计算并提取各次谐波电流的含量，产生谐波电流指令，通过功率执行器件产生与谐波电流幅值相等方向相反的补偿电流，并注入电力系统中，从而抵消非线性负载所产生的谐波电流。

王长幸经理

2880263323

18860995109

江苏无锡市江阴市南闸东盟工业园区5号

期待你的来电